New brake pads can oftentimes produce some initial noise and dusting while driving, which over time, will begin to lessen as transfer film is built up on the bare rotor surface. This is normal for most brake pads and will cease as the surfaces properly bed-in. Following the brake pad manufacturer’s specific bed-in procedure can guarantee an even layer of transfer film on the rotor, helping to minimize brake judder and the possibility of warping the rotors due to uneven heating.

The brake system on an automobile is vital for it to operate safely. If brakes aren't functioning properly, it’s impossible to slow or stop a vehicle when necessary. If a vehicle’s operator believes there may be issues with the braking system, troubleshooting the problem is not always easy to do. All parts of the system must each be in good condition in order to work correctly. Recognizing indications of problems requires some mechanical knowledge about how the system works, as well familiarity with the system in order to spot a specific problem.

One of the more common problems owners face when it comes to their vehicles is when brake dust gets between the back of the brake pad and the caliper piston. This can cause vibration, or squealing, during driving. When the brake pedal is pressed, the piston presses against the brake pad and stops the vibration, and the squealing.

1.  Brake Pads. Some brake pads produce significantly more dust than others.  All brake pads release some amount of particles and dust, which the size and color can vary depending on the pad compound. Generally, the more strength a compound has, the more dust and noise it will generate. Many ceramic compound pads discharge a fainter color dust that may not show on a vehicle’s wheels as easily.

2.  Adhesive. When other methods may not be working, try stopping the brakes from squealing by applying a small amount of adhesive to the back of the brake pad. This adheres the pad to the caliper piston and will normally stop the vibration.

3.  Anti-Squeal Pads. These days, most brake pad sets come with an anti-squeal pad. However, if yours do not, the pads can usually be purchased at most auto parts stores.

4.  Brake Pad Grease. The brakes on your car cause it to slow down and stop using friction. The brake pads press against the rotor or drum in the wheel. Using lubrication on a system that requires friction might seem like a bad idea to some, but the correct lubricants are essential to proper brake function. Applying brake pad grease to the back of the brake pad can stop vibration. The grease is sold in packets at most auto parts stores.

Take a look at our brake services and let us ensure your brakes are the best that they can be!